MPE/iX Documentation Guide (32650-90896)

Chapter 8 83

Networking and Communications

• Program design, buffer management, and debugging.

NetIPC 3000/XL Programmer's Reference Manual

Part Number: 5958-8600

Functional Focus: Network programming

This manual discusses the intrinsics used in network interprocess communication

(NetIPC). NetIPC provides access to the Transmission Control Protocol (TCP) and the X.25

protocol.

This manual contains information on the following topics:

• NetIPC fundamentals including connections and sending/receiving messages.

• Cross-system NetIPC.

• NetIPC intrinsics.

• NetIPC commands.

NS Cross-System NFT Reference Manual

Part Number: 5960-1634

Functional Focus: Network management

This manual describes cross-system NFT (network ﬁle transfer) between HP 1000, HP

3000 (MPE V/E and MPE/iX), HP 9000 (Series 300, 500, and 800), VAX/VMS, and PC

nodes.

This manual contains information on the following topics:

• File copying formats.

• NS DSCOPY command syntax.

• HP 1000, HP 3000, HP 9000, VAX/VMS, and PC source ﬁles.

NS3000/iX Error Messages Reference Manual

Part Number: 36923-90043

Functional Focus: Network programming and usage

This manual is a catalog of all network-related error messages that can be encountered

during network operations. It provides short explanations of the probable nature of the

errors and suggested resolutions. It also provides a general overview of problem

identiﬁcation and troubleshooting techniques.

This manual includes error messages generated by the LAN/console card.

This manual contains information on the following topics:

• NS3000/iX error messages.

• LAN/console error messages.