MPE/iX Quick Reference Guide (32650-90881)

38 Chapter1
Command Descriptions
Commands Syntax
[ [;BOOST= {DECAY } ]
{OSCILLATE}
[ [;TIMESLICE=] tslice]
[ [;MINCPUPCT=] minpercent]
[ [;MAXCPUPCT=] maxpercent]
[ [;POSITION=] existingwg]
NOTE
Misuse of this command can significantly degrade system operating
efficiency.
OCTCOMP
Converts a compiled MPE V/E program into native mode (NM) code for the 900 Series HP
3000.
OCTCOMP [ input ] [,[ targetfile ][,[ list ]][;INFO= quotedstring ]]
or
OCTCOMP [ input ] [,[ targetfile ][,[ list ][,[INFO=] quotedstring ]]]
OCTCOMP SOURCEIN,OCTOUT;INFO="TRANS=1,2,3,4"
OPENQ
Opens the spool queue for a specified logical device or device class.
OPENQ { ldev [;SHOW]
devclass [;SHOW]
devname [;SHOW]
@ }
OPENQ 6;SHOW
OPTION
This command modifies the environment of user defined commands and command files. It
is used within the command definition to set up and change the environment dynamically.
OPTION [LIST
NOLIST] [,] [RECURSION
NORECURSION]
OPTION LIST
OUTFENCE
Defines the minimum priority that an output spoolfile needs in order to be printed.
OUTFENCE outputpriority [;LDEV= ldev ] [;DEV= { dev
devclass
devname }]
OUTFENCE 14
OUTFENCE 7;LDEV=6