MPE/iX System Utilities Reference Manual (32650-90908)

Chapter 9
FSCHECK
Operation
114
Parameters
The DEV parameter is optional. If omitted, the default is to synchronize the account and group directories of
the system volume set.
set_name Set_name is the name of the volume set whose directories are to be synchronized. The
volume set must be opened. (The set’s master volume must be mounted in the MASTER
state as displayed by the DSTAT command).
QUIET QUIET specifies that the list of accounts and groups processed should not be displayed on the
$STDLIST device. If ;QUIET is not specified SYNCACCOUNTING displays a list of accounts and
groups as they are processed. The format of this list is similar to the output of the REPORT
command. When the disk space accounting is corrected for a group or account ACCOUNTING
CORRECTED is displayed next to the group or account entry in the list.
Example
fscheck: SYNCACCOUNTING MPEXL_SYSTEM_VOLUME_SET
Return
TOTALEXTENTS [TE]
This command displays the total number of sectors occupied by directory space, special space, permanent file
space, spool file space, and new and temp file space on the specified volume(s).
Syntax
ldev
TOTALEXTENTS [DEV=]set_name
ALL
Parameters
The DEV parameter is optional. If omitted, the default is to display the extent totals on each mounted volume
of the system volume set.
ldev Ldev is a number from 1 to 32,767, specifying the logical device on which the extent totals
on the volume to be displayed is mounted. The volume must be mounted in the MASTER or
MEMBER state as determined by the DSTAT command.
set_name Set_name is the name of the volume set whose extent totals are to be displayed. The volume
set must be opened (the set’s master must be mounted in the MASTER state as displayed by
the DSTAT command).
ALL ALL displays the extent totals on each volume mounted in the MASTER or MEMGER state,
as determined by the DSTAT command.
Example
fscheck: TOTALEXTENTS ALL
Return