MPE/iX System Utilities Reference Manual (32650-90908)

UPSUTIL for MPE/iX
UPSUTIL Commands
Chapter 32
238
most recent execution of the “powerfail command file”.
status - Show System UPS Monitor process status.
------------------------------------------------------------------------------
UPSUTIL: Command >
EXIT Command
The EXIT command terminates a UPSUTIL session. When the EXIT command is entered, UPSUTIL finishes
execution and returns to the MPE/iX Command Interpreter.
Syntax
exit
Example
--------------------------------------------------------------------------
UPSUTIL: Command > exit
--------------------------------------------------------------------------
END OF PROGRAM:
CONFIG Command
The CONFIG command causes UPSUTIL to examine the I/O configuration tables of the currently running
system to determine what (if any) UPS devices are configured on the system, and then to display the list of
configured UPS devices (if any).
Syntax
config
Example
The first example shows the results of a CONFIG command performed on a system on which there are three
UPS devices currently configured.
For convenience in referring to the display, UPSUTIL consecutively numbers the UPS devices that it finds in
the system configuration, starting with UPS #1. This “UPS number” has no operational significance in the
system: it merely provides a convenient means for counting and referring to the system's UPS devices.
The LDEV numbers do have operational meaning within the system. These are the file system’s “logical
device numbers” that were assigned to the UPS devices during system configuration. These LDEV numbers
can be used to check and corroborate the system’s SYSGEN and NMMGR NMCONFIG I/O configurations for
the UPS devices. The MPE/iX “:SHOWDEV” command will display all LDEV numbers configured on the
running system, including, as a subset, these UPS LDEV numbers.
--------------------------------------------------------------------------UPSUTIL: Command > config
--------------------------------------------------------------------------
Begin SHOW UPS CONFIGURATION Operation