MPE/iX System Utilities Reference Manual (32650-90908)

Chapter 2

Utilities Quick Reference

SYSMAP

Syntax

SYSDIAG

DUI> RUN SYSMAP

ENTER MAP>

Operation

Use SYSMAP to display the hardware configuration of a system. It displays the device type, product number,

logical device number (LDEV) and device address of I/O devices, and the CPU and memory boards.

SYSMAP is part of the online diagnostics subsystem. To use SYSMAP, you start the diagnostic subsystem by

entering SYSDIAG and, at the DUI> prompt, enter the command RUN SYSMAP. You then choose one of three

basic map options:

• CPUMAP, to get information about the cpu

• MEMMAP, to get information about the size, location and other information about system memory

• IOMAP, to get general I/O configuration information, information about a specific device class, or

information about devices on or below a specific physical address

Additional Discussion

For more information, refer to Chapter 26, “SYSMAP,” and to the Precision Architecture: HP 3000/9xx & HP

9000/8xx Online Diagnostics Subsystem Utilities Manual.