MPE/iX System Utilities Reference Manual (32650-90908)

Chapter 4
BULDACCT
Operation
76
Operation
To invoke BULDACCT and use the utility interactively, enter:
BULDACCT
The utility responds with the BULDACCT: prompt, where you enter options from the list shown in Table 4-1
You may use a maximum of 80 characters in the command line.
Or, you may invoke BULDACCT and enter options when you issue the command, like this:
BULDACCT;INFO=" ... "
In this format, you insert options from the list shown in Table 4-1 in the ;INFO string. You may use a
maximum of 240 characters.
The processing options for the BULDACCT utility are shown in Table 4-1. The capital letters denote keywords
and the lower case letters denote user selected names.
The BULDACCT utility produces two job files: BULDJOB1 and BULDJOB2, which you use in the following way:
• To create users, hierarchical directories, groups and accounts on the destination system, move BULDJOB1
to that system and stream it.
• To create user-defined command files (UDCs) on the destination system, first move all of the files using
the STORE and RESTORE commands (or, if the destination system is on a network, you can directly copy the
UDC files.) Then, to set system, account and user level UDC's, move BULDJOB2 to the destination
system and stream it.
BULDACCT always creates two files, BULDJOB1 and BULDJOB2, even if only one is needed.
Table 4-1 BULDACCT Processing Options
Option Description
%HELP displays detailed information about the options
%QUIT quits the interactive prompt
[acct_list]%NODIRS prohibits migration of any hierarchical directories to
BULDJOB1
[acct_list]%ROOT migrates hierarchical directories immediately under
ROOT ("/")
[acct_list]%NOROOT prohibits migration of the ROOT hierarchical directories to
BULDJOB1
acct_list%VSACCT=user_set migrates accounts and groups to the user_set volume set
acct_list%VS=user_set migrates only the groups to the user_set volume set
acct_list%UV[=user_set] selects accounts with at least one group on any non-system
volume set
acct_list%FROMVS=home
_volume_set_name
specifies account list with the home volume set as a
selection criteria