NS3000/iX Error Messages Reference Manual (36923-90043)

142 Chapter14
VALERR and VALWARN Messages
timer (or the TCP Connection Assurance timer) so that the X.25 timer
has a greater value than the TCP timer.
1103 MESSAGE: SVCPATH HAS NO X.25 ADDRESS—THIS IS VALID ONLY
FOR DDN.
CAUSE: At least one SVCPATH entry does not have an X.25 address key
configured. This configuration will work only if the link is connected to
a DDN.
ACTION: If the link is not connected to a DDN, make sure all SVCPATH
entries have an address key configured under the path
NETXPORT.NI.NIname.PROTOCOL.X25.SVCPATH.