NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 15 143
LAN, LAN/Console, Token Ring LAN Error Messages
15 LAN, LAN/Console, Token Ring
LAN Error Messages
Messages generated by the LAN, LAN/console, Token Ring LAN are the
following type:
Internal driver error in SYSLINK (LANWARN ###) or (LANERR ###)
where ### is an error number.
2 MESSAGE: Bad LINK ID.
CAUSE: An invalid LINK ID was passed to the link driver’s write
initiator.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: An invalid LINK ID was specified in the rendezvous request
message.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
3 MESSAGE: Bad OPEN ID.
CAUSE: An invalid OPEN ID was specified in the rendezvous request
message.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
5 MESSAGE: Unable to obtain a buffer manager buffer.
CAUSE: The buffers are not freed.
ACTION: Warmstart the system and correct the user programs.
CAUSE: Some other process has obtained buffers reserved for the driver.
ACTION: Write down the error information displayed on the console,
take a system dump, submit an CR, and call your Hewlett-Packard
representative.
6 MESSAGE: Unable to obtain an I/O Services message frame.
CAUSE: The driver could not obtain a message frame from a user port
for newly arrived LAN packet (or from CAM’s port, in the case of a CIO
card) for a new DMA request to the card.
ACTION: Write down the error information displayed on the console,
take a system dump, submit an CR, and call your Hewlett-Packard
representative.