NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 15 145
LAN, LAN/Console, Token Ring LAN Error Messages
14 MESSAGE: Unable to send I/O Services message frame to another
process.
CAUSE: A call to a system message SEND routine returned an error. The
destination port may belong to a process that no longer exists or is not
operating with required capabilities.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
16 MESSAGE: LAN console is not supported.
CAUSE: The console DM tries to bind with a driver as a LAN Console
DM.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
17 MESSAGE: Unable to obtain a step data structure from driver internal
resources.
CAUSE: All steps are in use and wait for DMA completion. The driver
may be low on steps because of heavy LAN traffic.
ACTION: Ignore this problem unless other problems are occurring. If
you are experiencing other problems, write down the error information
displayed on the console and call your Hewlett-Packard representative.
18 MESSAGE: Unable to send I/O Services message frame to another
process.
CAUSE: A call to a system message send routine returned in error. The
destination port may belong to a process that no longer exists or is not
operating with required capabilities.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
19 MESSAGE: NIO LAN/Console card reports internal fatal hardware
error.
CAUSE: Indicates a problem caused by bad hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
20 MESSAGE: Unable to release buffer manager buffer.
CAUSE: The driver tried to free memory that the buffer manager did not
recognize as a valid buffer because of a driver problem or memory data
corruption. Also, the driver may have tried to free a buffer that is
already freed.
ACTION: System dump required. Call your Hewlett-Packard
representative.