NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 15 147
LAN, LAN/Console, Token Ring LAN Error Messages
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
40 MESSAGE: The Middle Plane is in wrong state.
CAUSE: The Middle Plane state machine table is corrupted.
ACTION: Write down the error information displayed on the console
submit an CR, take a dump and call your Hewlett-Packard
representative.
41 MESSAGE: Missing inbound pool in the rendezvous request
message.
CAUSE: The rendezvous request message does not specify inbound
buffer pool.
ACTION: Write down the error information displayed on the console
submit an CR, and call your Hewlett-Packard representative.
42 MESSAGE: Missing rendezvous info in the rendezvous request
message.
CAUSE: The rendezvous request message does not have a pointer to the
rendezvous information buffer.
ACTION: Write down the error information displayed on the console
submit an CR and call your Hewlett-Packard representative.
48 MESSAGE: Unsupported module type in IODC.
CAUSE: The problem is caused by bad NIO LAN hardware, the wrong
path number, or the wrong type of card.
ACTION: Try these actions in this order:
1. Verify that the configured physical path is correct by using NMMGR.
2. Verify that the card is a NIO LAN/console card.
3. If you have tried both of the actions above and are still experiencing
difficulties, your Hewlett-Packard representative must run
diagnostics on the LAN/console card.
49 MESSAGE: Unsupported software model in IODC.
CAUSE: The problem is caused by bad NIO LAN hardware, the wrong
path number, or the wrong type of card.
ACTION: Try these actions in this order:
1. Verify that the configured physical path is correct by using NMMGR.
2. Verify that the card is a NIO LAN/console card.
3. If you have tried both of the actions above and are still experiencing
difficulties, your Hewlett-Packard representative must run
diagnostics on the LAN/console card.