NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 15 149
LAN, LAN/Console, Token Ring LAN Error Messages
58 MESSAGE: The NIO LAN/console card detects illegal bind request.
CAUSE: The problem is caused by a link driver internal problem.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
59 MESSAGE: The NIO LAN/console card detects a bad length of the
configuration data buffer.
CAUSE: The problem is caused by data corruption in the configuration
quad.
ACTION: Write down the error information displayed on the console,
submit an CR, take a dump and call your Hewlett-Packard
representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
60 MESSAGE: The NIO LAN/console card detects bad multicast address
in the configuration data.
CAUSE: A bad multicast address was entered into the Multicast Address
Table.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
61 MESSAGE: The NIO LAN/console card detects a bind request to
illegal register.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
62 MESSAGE: The NIO LAN/console card detects a bad Station Address
in CONFIG_SA.
CAUSE: The problem is caused by configuring the wrong Station
Address in NMMGR.