NS3000/iX Error Messages Reference Manual (36923-90043)

150 Chapter15
LAN, LAN/Console, Token Ring LAN Error Messages
ACTION: Use NMMGR to verify that the configured Station Address is
correct.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
63 MESSAGE: The NIO LAN/console card detects a bind request to
already bound register.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
64 MESSAGE: The NIO LAN/console card detects an unbind request to
an unbound register.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
65 MESSAGE: The NIO LAN/console card detects too many multicast
addresses in the configuration buffer.
CAUSE: The problem is caused by a link driver internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The problem is caused by a bad NIO LAN/console backplane.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
66 MESSAGE: The NIO LAN/console card reports that expected
CCMD_IN or CCMD_OUT was not found.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
67 MESSAGE: The NIO LAN/console card reports that CCMD_OUT was
sent to an inbound only register set.
CAUSE: Unknown. Need more information.