NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 15 155
LAN, LAN/Console, Token Ring LAN Error Messages
117 MESSAGE: The CIO LAN card detects a fatal backplane error.
CAUSE: Unknown. Need more information.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the CIO LAN card.
118 MESSAGE: The Identity Request to the CIO LAN card failed.
CAUSE: Unknown. Need more information.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the CIO LAN card.
119 MESSAGE: The CIO LAN card reports an invalid hardware ID.
CAUSE: The problem is caused by bad CIO LAN hardware, the wrong
path number, or the wrong type of card.
ACTION: Try these actions in this order:
1. Verify that the configured physical path is correct by using NMMGR.
2. Verify that the card is a NIO/LAN console card.
3. If you have verified that the physical path and card type are correct
and are still experiencing problems, your Hewlett-Packard
representative must run diagnostics on the LAN/console card.
120 MESSAGE: The Status Request to the CIO LAN card failed.
CAUSE: Unknown. Need more information.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the CIO LAN card.
122 MESSAGE: The CIO LAN card can not sense MAU heartbeat.
CAUSE: The MAU is disconnected or bad.
ACTION: Check your cables and if this error still appears, your
Hewlett-Packard representative must run diagnostics on the CIO LAN
card.
123 MESSAGE: The unbind request to the CAM failed.
CAUSE: The driver is not bound to the CAM.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
CAUSE: The driver still has outstanding requests to the CAM.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.