NS3000/iX Error Messages Reference Manual (36923-90043)

166 Chapter16
100VG-AnyLAN and HP-PB 100Base-T Error Messages
SDI Generic Status Values
46 ($2E) MESSAGE: Remote link has disconnected.
CAUSE: For the Disconnect Event, the remote link station issued a
Disconnect command to the link station, and the link station has
replied that disconnect command and notified the subsystem.
ACTION: According to the subsystem.
47 ($2F) MESSAGE: Link disconnected, although remote has not
acknowledged.
CAUSE: The driver issued a disconnect command to the remote link
station as a result of receiving a Disconnect Request. No
acknowledgment has been received from the remote link station and
the in station has been closed.
ACTION: According to the subsystem.
48 ($30) MESSAGE: An active connection with the remote link already exists.
CAUSE: The Driver is already configured.
ACTION: According to the subsystem.
81 ($51) MESSAGE: Link sharing conflicts with current usage.
CAUSE:
• A driver is being exclusively accessed by a subsystem already, no
resources have been allocated for the second subsystem.
• A subsystem wants to have exclusive access to a “shared” driver
which is currently in use, no resources have been allocated.
• Driver does not support link sharing.
• Configurable parameters conflict.
ACTION: According to the subsystem.
82 ($52) MESSAGE: Configuration file access error.
CAUSE: A module Configurator/Deconfigurator detected an error in the
configuration file on accessing the configuration file.
ACTION: According to the subsystem.
83 ($53) MESSAGE: Error in interface with Link Support Services.
CAUSE: A module Configurator/Deconfigurator failed in calling Link
Support Services (LSS) procedures.
ACTION: According to the subsystem.
84 ($54) MESSAGE: Error in interface with Trace Services.
CAUSE: A module Configurator/Deconfigurator failed to start/stop the
TRACE MANAGER, however, the configuration/deconfiguration
operation has the completed (example, The Driver has deallocated the