NS3000/iX Error Messages Reference Manual (36923-90043)

18 Chapter1
CIERR Error Messages
5032 MESSAGE: INTERNAL DS ERROR — COULD NOT GET PORT DST.
CAUSE: A port data segment entry could not be allocated for the port
between the CI and the Virtual Terminal server.
ACTION: See Appendix A , “Submitting a CR.”
5033 MESSAGE: INTERNAL DS ERROR — COULD NOT START VT.
CAUSE: The Virtual Terminal service could not be initiated.
ACTION: See Appendix A , “Submitting a CR.”
5034 MESSAGE: INTERNAL DS ERROR — RECEIVED BAD PORT
MESSAGE.
CAUSE: A port message with an unexpected function code was received
from the Virtual Terminal server process.
ACTION: See Appendix A , “Submitting a CR.”
5035 MESSAGE: VT SERVER NOT AVAILABLE NOW.
CAUSE: The Virtual Terminal server process could not be created.
There may be several reasons:
1. The DSSERVER.NET.SYS program is missing.
2. The number of created DSSERVER processes is at the allowed
maximum. The NSCONTROL SHOW=SERVERS command will tell you the
current and maximum number of DSSERVERs.
3. The DSSERVER process aborted during its initialization.
ACTION: Depending on the cause:
1. Restore the DSSERVER.NET.SYS program from the NS/3000 product
tape.
2. Wait for the number of DSSERVERs to decrease, or increase the
maximum number of DSSERVERs by NSCONTROL
SERVER=DSSERVER,,new max> (Only users with NM capability can
use the NSCONTROL command.)
3. See Appendix A , “Submitting a CR.”
5036 MESSAGE: LOCAL VT SERVICE HAS NOT BEEN STARTED.
CAUSE: The local Virtual Terminal service (VTL) has not been started
using the NSCONTROL command.
ACTION: Issue either an NSCONTROL START or an NSCONTROL
START=VTL command to start the local VT service, or wait until the
service is started. (Only users with NM capability can use the
NSCONTROL command.)
5037 MESSAGE: LOCAL VT SERVICE HAS BEEN ABORTED.
CAUSE: An NSCONTROL ABORT has been issued. This immediately