NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 17 283
PCI 100Base-T Error Messages
SDI Generic Status Values
ACTION: According to the subsystem.
83 ($53) MESSAGE: Error in interface with Link Support Services.
CAUSE: A module Configurator/Deconfigurator failed in calling Link
Support Services (LSS) procedures.
ACTION: According to the subsystem.
84 ($54) MESSAGE: Error in interface with Trace Services.
CAUSE: A module Configurator/Deconfigurator failed to start/stop the
TRACE MANAGER, however, the configuration/deconfiguration
operation has the completed (example, The Driver has deallocated the
Driver’s resources).
ACTION: According to the subsystem.
85 ($55) MESSAGE: Resource deallocation error.
CAUSE: For the error shutdown handling, all SAPs and all associated
link stations are deallocated, and the driver is deconfigured.
ACTION: None
86 ($56) MESSAGE: One or more still active resources were deallocated.
CAUSE: For the error shutdown handling, all SAPs and all associated
link stations are deallocated, and the driver is deconfigured.
ACTION: None
87 ($57) MESSAGE: Link is already active.
CAUSE: The Driver is already configured.
ACTION: According to the subsystem.
121 ($79) MESSAGE: A requested feature is not supported by this link.
CAUSE: Feature is not supported/implemented. This might be the result
of subsystem “probing” the capability of the driver (example,
Connection oriented subsystem over a datagram service).
ACTION: None
122 ($7A) MESSAGE: A requested option is not supported by this link.
CAUSE: The Driver understands the option that user requested,
however, it does not support the option.
ACTION: Check Driver ES and make sure you talk to the right Driver.
123 ($7B) MESSAGE: Link was expecting optional parameters but they were
missing.
CAUSE: The Driver was expecting some driver specific information, the
driver may or may not be configurated (for some drivers, this
information may be considered critical; and for some other drivers, this
information may be considered optional).