NS3000/iX Error Messages Reference Manual (36923-90043)

362 Chapter17
PCI 100Base-T Error Messages
SDI Driver Specific Status Values
restart it. Most likely, once the reset is complete and the driver has
“reinitalized” the hardware (card), the driver can resume operating
normally.
If the problem persists, it may indicate a bad adapter card; try
replacing the card.
7710 CLAS0001 MESSAGE: Driver encountered a hardware problem.
CAUSE: While attempting to enable loopback mode, the driver
encountered an error while trying to read a register from the PHY
(“Cause” = 32-bit status from pbt_mii_read16).
ACTION: The driver may become unusable or attempt an auto-reset. If
the driver appears to hang, shut down the network manually and then
restart it. Most likely, once the reset is complete and the driver has
“reinitalized” the hardware (card), the driver can resume operating
normally.
If the problem persists, it may indicate a bad adapter card; try
replacing the card.
7740 CLAS0001 MESSAGE: Driver encountered a hardware problem.
CAUSE: While attempting to enable loopback mode, the driver
encountered an error while trying to read a register from the PHY
(“Cause” = 32-bit status from pbt_mii_read16).
ACTION: The driver may become unusable or attempt an auto-reset. If
the driver appears to hang, shut down the network manually and then
restart it. Most likely, once the reset is complete and the driver has
“reinitalized” the hardware (card), the driver can resume operating
normally.
If the problem persists, it may indicate a bad adapter card; try
replacing the card.
7770 CLAS0001 MESSAGE: Driver encountered a hardware problem.
CAUSE: While attempting to enable loopback mode, the driver
encountered an error while trying to read a register from the PHY
(“Cause” = 32-bit status from pbt_mii_read16).
ACTION: The driver may become unusable or attempt an auto-reset. If
the driver appears to hang, shut down the network manually and then
restart it. Most likely, once the reset is complete and the driver has
“reinitalized” the hardware (card), the driver can resume operating
normally.
If the problem persists, it may indicate a bad adapter card; try
replacing the card.