NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 18 381
PCI LAPBMUX Link Error Messages
SDI Generic Status Values
85 ($55) MESSAGE: Resource deallocation error.
CAUSE: For the error shutdown handling, all SAPs and all associated
link stations are deallocated, and the driver is deconfigured.
ACTION: None
86 ($56) MESSAGE: One or more still active resources were deallocated.
CAUSE: For the error shutdown handling, all SAPs and all associated
link stations are deallocated, and the driver is deconfigured.
ACTION: None
87 ($57) MESSAGE: Link is already active.
CAUSE: The Driver is already configured.
ACTION: According to the subsystem.
121 ($79) MESSAGE: A requested feature is not supported by this link.
CAUSE: Feature is not supported/implemented. This might be the result
of subsystem “probing” the capability of the driver (example,
Connection oriented subsystem over a datagram service).
ACTION: None
122 ($7A) MESSAGE: A requested option is not supported by this link.
CAUSE: The Driver understands the option that user requested,
however, it does not support the option.
ACTION: Check Driver ES and make sure you talk to the right Driver.
125 ($7D) MESSAGE: Link type of the named link is not supported.
CAUSE: The Linkname passed by the Module Configuration Call or
Deconfigurator Call is invalid. The particular driver is not configured.
ACTION: Fix the configuration file and try again.
126 ($7E) MESSAGE: Link type of the named link is not supported.
CAUSE: The linktype that stored in the NMCONFIG file which
associated with the Linkname in a Module Configurator call is
unsupported. The particular driver is not configured.
ACTION: Fix the Configuration file and try again.
127 ($7F) MESSAGE: An invalid subsystem open ID was specified.
CAUSE: The Open ID in the Rendezvous Request or Module
Deconfigurator call is invalid. The LSAP is not opened or closed.
ACTION: Use a Valid open ID.
128 ($80) MESSAGE: An invalid protocol bind ID was specified.
CAUSE: The requested Protocol Bind ID does not exist.