NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 20 439
LAP-B Link Error Messages
LAP-B Link Startup Error Messages
ACTION: Either restore the PSILAPB0.PUB.SYS file from a backup tape,
or wait for the program or process that has this file opened exclusively
to close it.
6 MESSAGE: FGETINFO failed to return recsize and/or numrec.
CAUSE: The file PSILAPB0.PUB.SYS is corrupted.
ACTION: Restore the file from a backup tape.
7 MESSAGE: FREEZE of download file failed.
CAUSE: The system is experiencing memory shortage problems.
ACTION: Please record the error information printed on the console and
contact your Hewlett-Packard representative.
8 MESSAGE: Could not open trace file !
CAUSE: Either the trace file name specified is invalid, or the trace file
specified was opened for exclusive access.
ACTION: Either wait for the program or process that has the trace file
opened exclusively to close the file, or specify a different file name or let
it default to NMTCxxxx.PUB.SYS (xxxx = next available 4 digit
number).
9 MESSAGE: Could not start trace.
CAUSE: There are many causes and the only way to determine them is
by the status indicator.
ACTION: Please record the error information printed on the console and
contact your Hewlett-Packard representative. In the meantime, try
running without trace.
10 MESSAGE: Could not start trace.
CAUSE: Trace may have been turned off via the LINKCONTROL command,
but the link software status indicated that it was on.
ACTION: Ignore this problem unless you are experiencing other
problems. Otherwise record the error information printed on the
console and contact your Hewlett-Packard representative.
11 MESSAGE: Could not freeze the driver configuration data.
CAUSE: The system is experiencing memory shortage problems.
ACTION: Please record the error information printed on the console and
contact your Hewlett-Packard representative.
12 MESSAGE: Could not send the configuration message.
CAUSE: Internal system ports problem.
ACTION: Please record the error information printed on the console and
contact your Hewlett-Packard representative.