NS3000/iX Error Messages Reference Manual (36923-90043)

50 Chapter4
NFT/3000 Error Messages
25 MESSAGE: SCHAR AND ICHAR NOT ALLOWED AS GLOBAL SPECS.
CAUSE: SCHAR and ICHAR may not follow “+” on the command line.
ACTION: Specify these options for every transfer.
26 MESSAGE: INVALID RESTART SPEC.
CAUSE: RESTART option syntax is incorrect.
ACTION: See Using NS 3000/iX Network Services for correct syntax.
27 MESSAGE: FILE ID NOT ALLOWED AS GLOBAL SPECIFICATION.
CAUSE: File ID cannot follow “+” on command line. All other
specifications may be made global.
ACTION: Retype and reissue the command.
28 MESSAGE: REP(LACE) OVERRIDES APP(END) AND OVER(WRITE).
CAUSE: Reminds user of the consequences of issuing REP option.
ACTION: None.
29 MESSAGE: APP(END) OVERRIDES REP(LACE) AND OVER(WRITE).
CAUSE: APP (append) was specified after REP (replace) or OVER
(overwrite), therefore it takes effect during the transfer.
ACTION: None.
31 MESSAGE: OVER(WRITE) OVERRIDES APP(END) AND REP(LACE).
CAUSE: Reminds user of OVER option’s consequences.
ACTION: None.
34 MESSAGE: INVALID RSIZE.
CAUSE: RSIZE specified contains non-numeric characters or is too large.
ACTION: Retype and reissue the command with the correct RSIZE.
35 MESSAGE: EQUALS SIGN MUST FOLLOW !
CAUSE: Equals sign does not follow the SDEV, DEV, or CODE option.
ACTION: Retype and reissue the command.
36 MESSAGE: ! OVERRIDES PREVIOUS RECORD TYPE.
CAUSE: Either FIX or VAR was specified when the other was already
specified in the command line or globally.
ACTION: None.
37 MESSAGE: ! OVERRIDES PREVIOUS FILE TYPE.
CAUSE: Either SEQ or DIR was specified when the other was already
specified in the command line or globally.