NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 4 53
NFT/3000 Error Messages
56 MESSAGE: CREATION OF INTERNAL IPC PORT FAILED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
57 MESSAGE: ATTEMPT TO RECEIVE NFT CHANGE REQUEST FAILED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
58 MESSAGE: UNKNOWN INTERNAL MESSAGE WAS RECEIVED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
60 MESSAGE: NFT SERVER WAS ABORTED.
CAUSE: An internal error or external request (ABORTJOB) may have
aborted the NFT server.
ACTION: Check NM log file. See Appendix A , “Submitting a CR,” of this
manual.
61 MESSAGE: INTERNAL ERROR — WARNING QUEUE OVERFLOW.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
62 MESSAGE: NEW SIZE SPECIFICATION OVERRIDES PREVIOUS
SETTING.
CAUSE: The size specified in the transfer overrides the global
specification.
ACTION: None.
63 MESSAGE: UNSUPPORTED KEYWORD: !
CAUSE: Keyword specified is not currently supported by NFT/3000.
ACTION: Retry.
64 MESSAGE: NO FILES IN GENERIC REQUEST.
CAUSE: There are no files in the requested generic file set.
ACTION: Check file names and try the transfer again.
65 MESSAGE: UNABLE TO CREATE GENERIC TEMP FILE.
CAUSE: NFT needs a temporary file to hold file names in a generic set.
This error results when NFT is unable to create this file. The cause may
be a lack of disk space, duplicate file name.
ACTION: Check file space available, increase it if necessary (and
possible). Check for temporary files named GENSET@. Purge these and
try the transfer again.