NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 21 533
Logging Location Codes
Control Process Logging Location Codes
“Submitting a CR.”
769 CLAS0002 MESSAGE: INTERNAL ERROR; Async request from link
CAUSE: NETCP received an asynchronous event message containing an
error status, from the LAPBMUX driver.
ACTION: NETCP stopped the device associated with the link, also
stopped any attached protocol and drivers. It may be possible to restart
the device using :NETCONTROL ADDLINK=linkname; NET=niname. If the
problem persists, see Appendix A , “Submitting a CR.”
770 CLAS0002 MESSAGE: INTERNAL ERROR; Internal resource error
CAUSE: NETCP received a connect event message from the LAPBMUX
link driver for the LAPB device, which does not exist.
ACTION: This error is not fatal, however if the error occurs repeatedly,
see Appendix A , “Submitting a CR.”
771 CLAS0002 MESSAGE: INTERNAL ERROR; Internal resource error
CAUSE: NETCP received a disconnect event message from the
LAPBMUX link driver for the LAPB device, which does not exist.
ACTION: This error is not fatal, however if the error occurs repeatedly,
see Appendix A , “Submitting a CR.”
772 CLAS0002 MESSAGE: INTERNAL ERROR; Internal resource error
CAUSE: NETCP received an Exception event message from the
LAPBMUX link driver for the LAPB device, which does not exist.
ACTION: This error is not fatal, however if the error occurs repeatedly,
see Appendix A , “Submitting a CR.”