NS3000/iX Error Messages Reference Manual (36923-90043)

56 Chapter4
NFT/3000 Error Messages
84 MESSAGE: INSUFFICIENT BUFFER SPACE FOR USER REQUEST.
CAUSE: Probable system resource problem.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
85 MESSAGE: PM CAPABILITY IS REQUIRED FOR DEBUG.
CAUSE: To enter debug in NFT, Privileged Mode (PM) capability is
required.
ACTION: Contact your system operator.
86 MESSAGE: CI COMMAND EXECUTION FAILED.
CAUSE: Usually accompanied by an MPE error.
ACTION: Fix the MPE error.
87 MESSAGE: NEW SOURCE FILE CODE OVERRIDES PREVIOUS
SETTING.
ACTION: None.
CAUSE: Reminder to user.
88 MESSAGE: INVALID FCODE.
CAUSE: File code contains non-numeric characters or is too large.
ACTION: The file code must be specified as a number.
89 MESSAGE: SM or PM CAPABILITY REQUIRED TO COPY PRIVILEGED
FILES.
CAUSE: The user specified a negative file code but did not have system
manager or privileged mode capability.
ACTION: Make sure that the source file is accessed from a session (or
job) whose user has system manager or privileged mode capability.
90 MESSAGE: INVALID DATA MESSAGE WAS RECEIVED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
91 MESSAGE: UNABLE TO OBTAIN INFO ON NEWLY CREATED
SESSION.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
92 MESSAGE: INVALID STRING FOLLOWING RIGHT BRACKET.
CAUSE: One or more invalid characters follow the right bracket in the
logon part of the DSCOPY command.
ACTION: Re-enter the command using the correct delimiters.