NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 4 57
NFT/3000 Error Messages
93 MESSAGE: INVALID STRING FOLLOWING CLOSING QUOTE.
CAUSE: One or more invalid characters follow a closing quote. A file
name, node name, or logon name enclosed in quotes must be followed by
an appropriate delimiter.
ACTION: Re-enter the DSCOPY command using correct delimiters.
94 MESSAGE: BOUNDS VIOLATION.
CAUSE: Internal error parameter out of bounds.
ACTION: Check parameters passed to DSCOPY or DSCOPY
MSG.
95 MESSAGE: SPLITSTACK MODE CALLS NOT ALLOWED.
CAUSE: DSCOPY will not run in splitstack mode.
ACTION: Do not attempt to run DSCOPY in splitstack mode.
96 MESSAGE: FIRST PARAMETER IS OUT OF RANGE (0:14).
CAUSE: OPT has value other than 0 opt 14.
ACTION: Check content of OPT parameter.
100 MESSAGE: ILLEGAL BASIC CALLING SEQUENCE.
CAUSE: There is in an error in the calling sequence of a BDSCOPY
intrinsic call.
ACTION: Refer to Using NS 3000/iX Network Services for the correct
calling sequence.
103 MESSAGE: AUTOLOGON DISABLED; USE :REMOTE HELLO FOR
REMOTE SESSION.
CAUSE: Automatic logon facility has been turned off by the network
manager.
ACTION: Logon to the remote environment using the REMOTE
HELLO command. Specify this remote environment in the DSCOPY
command.
104 MESSAGE: RESTART KEYWORD NOT ALLOWED IN DSCOPYI FILE.
CAUSE: User is attempting a restart from the DSCOPYI command file.
ACTION: Only use the RESTART keyword when DSCOPYI has not been
redirected to a file.
105 MESSAGE: ERROR IN RETRIEVING RESTART ID NUMBER FROM
RESTART ID FILE.
CAUSE: An error occurred while attempting to obtain the restart ID
from the specified file.
ACTION: Verify that the restart ID file name and record number are
correct.