NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 21 571
Logging Location Codes
IP Logging Location Codes
133 CLAS0002 MESSAGE: None
CAUSE: A message fragment was discarded because of an internal
failure of bmgr_append_buffer (PARM = bmgr_append_buffer result
code).
ACTION: See Appendix A , “Submitting a CR,” of this manual.
137 CLAS0003 MESSAGE: None
CAUSE: A partially assembled message was discarded because the
fragment assembly timer expired (PARM is not significant).
ACTION: This will happen occasionally when a fragment is lost or
discarded. If it occurs often, it may indicate that a gateway is congested.
Reconfigure to achieve a better load balance.
139 CLAS0003 MESSAGE: None
CAUSE: A store and forward packet was discarded because there were
no store and forward buffers for the outbound network interface.
ACTION: This indicates that the gateway is congested. This can happen
until congestion avoidance measures are applied at the sending source
nodes. If this persistently occurs, there may be a runaway node on the
network that is disregarding SOURCE QUENCH messages.
141 CLAS0003 MESSAGE: None
CAUSE: After processing a store and forward packet, congestion control
thresholds have been reached (that is, 75% or more internal resources
have been used). A Source Quench packet will be sent to the source.
ACTION: Informative.
142 CLAS0002 MESSAGE: None
CAUSE: A store and forward packet was discarded because no buffers
were available in the store and forward buffer pool (PARM =
bmgr_get_buffer result code).
ACTION: See Appendix A , “Submitting a CR,” of this manual.
144 CLAS0002 MESSAGE: None
CAUSE: A store and forward packet was discarded because an internal
error was encountered in bmgr_write_buffer (PARM =
bmgr_write_buffer result code).
ACTION: See Appendix A , “Submitting a CR,” of this manual.
145 CLAS0003 MESSAGE: None
CAUSE: A store and forward packet was discarded because the IP time
to live expired (PARM unused).
ACTION: Informative.