NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 21 577

Logging Location Codes

IPU Logging Location Codes

1 CLAS0002 MESSAGE: None

CAUSE: Received a port message containing an invalid format code or

an invalid function code (PARM = complete function code).

ACTION: See Appendix A , “Submitting a CR,” of this manual.

3 CLAS0004 MESSAGE: None

CAUSE: Log port initiation.

ACTION: Informative.

10 CLAS0002 MESSAGE: None

CAUSE: Encountered a buffer manager failure attempting to read the

address alias list from the buffer passed in a DCN Start message

(PARM = READBUF result code).

ACTION: See Appendix A , “Submitting a CR,” of this manual.

11 CLAS0002 MESSAGE: None

CAUSE: Encountered a buffer manager error attempting to return the

buffer passed in a DCN Start message (PARM = FREEBUF result code).

ACTION: See Appendix A , “Submitting a CR,” of this manual.

12 CLAS0002 MESSAGE: None

CAUSE: There is not enough room for an entry in the DCN Table for the

network started in a DCN Start message. Space is allocated based on

the maximum number of directly connected networks (DCNs).

ACTION: Shut down the transport (NETCONTROL STOP). Check the

conﬁguration ﬁle for a disparity between networks conﬁgured and

maximum DCNs speciﬁed.

13 CLAS0002 MESSAGE: None

CAUSE: Encountered a buffer manager error attempting to get the

length of the buffer passed in a DCN Start message (PARM =

BUFFERINFO result code).

ACTION: See Appendix A , “Submitting a CR,” of this manual.

14 CLAS0002 MESSAGE: None

CAUSE: The length of the address alias list passed in a DCN Start

message exceeds the space allocated for the list in the IPC port DST.

The space is allocated based on the maximum number of directly

connected networks (DCNs).