NS3000/iX Error Messages Reference Manual (36923-90043)

70 Chapter5
NetIPC (SOCKERRS) Error Messages
ACTION: None, but no NetIPC or protocol module errors are available.
85 MESSAGE: INVALID SOCKET ERROR NUMBER.
CAUSE: IPCERRMSG was called with an invalid NetIPC error code.
ACTION: Check the value being passed.
86 MESSAGE: UNABLE TO OPEN ERROR CATALOG
SOCKCAT.NET.SYS.
CAUSE: The error message catalog does not exist, it is opened
exclusively, or the caller does not have access rights to the file.
ACTION: Notify your operator.
87 MESSAGE: GENMESSAGE FAILURE; NOT A MESSAGE CATALOG.
CAUSE: MAKECAT was not successfully run on the message catalog.
ACTION: Notify your operator.
88 MESSAGE: INVALID REQUEST SOCKET DESCRIPTOR.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
89 MESSAGE: INVALID REPLY SOCKET DESCRIPTOR.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
91 MESSAGE: WOULD EXCEED LIMIT OF REPLIES EXPECTED.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
92 MESSAGE: MUST REPLY TO BEFORE RECEIVING ANOTHER
REQUEST.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
93 MESSAGE: INVALID SEQUENCE NUMBER.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
94 MESSAGE: NO OUTSTANDING REQUESTS.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
95 MESSAGE: RECEIVED AN UNSOLICITED REPLY.
CAUSE: Internal error.