NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 6 117
Point-to-Point (Router) Network Interface Configuration Screens
Neighbor Gateways
• To change the gateway name of an existing gateway identification,
specify the gateway name and a new name; then press the
[Rename]
function key. The previously configured name is replaced, and the
screen displays the new name in a display field under the label
Configured Gateways.
• To delete an existing gateway identification, specify the gateway
name, then press the
[Delete] function key. Press the [Delete] function
key again to confirm the deletion. The previously configured name is
deleted and is no longer displayed in a display field under the label
Configured Gateways.
Fields Gateway name Enter a name to represent a gateway node on this
point-to-point network, through which one or more
remote networks can be reached. A gateway name can
contain as many as eight alphanumeric characters; the
first character must be alphabetic.
New name (Required only when renaming a gateway.) Enter
a name to represent a gateway node on this
point-to-point network. This new gateway name is used
in place of the current gateway name for an existing
gateway configuration. The name can contain as many
as eight alphanumeric characters; the first character
must be alphabetic.