NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

132 Chapter7
X.25 Network Interface Configuration Screens
Network Interface Configuration
Network Interface Configuration
The Network Interface Configuration screen (#112) in Figure 7-2 is
displayed when you press the
[Go To NI] function key at the Network
Transport Configuration Selection screen (Figure 4-2). It is also
displayed when you type the path name:
@NETXPORT.NI
in the Command window of any screen and press the [Enter] key.
Figure 7-2 Network Interface Configuration Screen
Use the fields and the function keys of the select screen to perform the
desired action.
• To define a new X.25 NI, specify an NI name and NI type X.25; then
press the [
Add] function key. The path for the selected NI name is
added to the configuration file and the next screen for configuring an
X.25 NI is displayed. You may configure up to 12 NI’s per
system (one NI must be used for loopback).
• To modify an existing NI, specify the NI name and press the
[Modify]
function key. The next screen is displayed with the configuration
data for that NI.