NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 7 139

X.25 Network Interface Conﬁguration Screens

X.25 User Facility Sets

The X.25 User Facility Sets screen (#164) in Figure 7-6 is displayed

when you press the

[Go To FACSET] function key at the General X.25

Conﬁguration screen (Figure 7-5). It is also displayed when you type

the path name:

@NETXPORT.NI.

NIname

.PROTOCOL.X25.FACSET

in the Command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured X.25 NI.

Figure 7-6 X.25 User Facility Sets

To edit an existing X.25 facility set, enter the name of the X.25 facility

set to be modiﬁed and press the

[Modify] function key. To add a new X.25

facility set, enter a new facility set name and press the

[Add] function

key.

You may conﬁgure up to 128 User Facility Sets under an X.25 NI.

Fields

Set name This name deﬁnes a set of X.25 parameters that can be

associated with an SVCPATH or a PVCPATH. The

name can contain as many as eight alphanumeric

characters. The ﬁrst character must be alphabetic.