NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 7 155

X.25 Network Interface Conﬁguration Screens

X.25 Link Conﬁguration

The X.25 Link Conﬁguration screen (#106) shown in Figure 7-12 is

displayed when you select an NI link name and press the

[Add] or

[Modify] function key at the X.25 Network Interface Link screen (Figure

7-11). It is also displayed when you type the path name:

@NETXPORT.NI.

NIname

.LINK.

linkname

in the Command window of any screen and press the [Enter] key, where

NIname is a conﬁgured X.25 NI, and linkname is a conﬁgure X.25 link.

Figure 7-12 X.25 Link Conﬁguration Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.