NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

170 Chapter8
Token Ring Network Interface Configuration Screens
Protocol Configuration
Protocol Configuration
The Protocol Configuration screen (#113) in Figure 8-4 is displayed
when you press the
[Go To Protocol] function key at the Token Ring
Network Interface Configuration screen (Figure 8-3). This screen is also
displayed when you type the path name:
@NETXPORT.NI.
NIname .PROTOCOL
in the Command window of any screen and press the
[Enter] key, where
NIname is a configured token ring NI.
Figure 8-4 Protocol Configuration Screen
For the token ring NI, you configure the IP and ARP protocols. Choose
the protocol to configure and press the corresponding function key.