NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

196 Chapter9

FDDI Network Interface Conﬁguration Screens

FDDI Network Interface Links

The FDDI Network Interface Links screen (#200) in Figure 9-7 is

displayed when you press the

[Go To LINK] function key at the FDDI

Network Interface Conﬁguration screen (Figure 9-3). It is also

displayed when you type the path name:

@NETXPORT.

NI.NIname

.LINK

in the command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured FDDI NI.

Figure 9-7 FDDI Network Inteface Links Screen

Use the ﬁelds and the function keys of this select screen to bind the

FDDI NI to the link. Enter the link name in the Link name ﬁeld and

press the

[Save Data] key. (If you wish to rename the link, simply enter the

new name and press the

[Save Data] key.)

Fields

Link name Make sure this is the same link name conﬁgured at the

FDDI Link Conﬁguration screen (path name LINK).

Press the

[Save Data] function key to save the link name

in the conﬁguration ﬁle. Verify that the link name has

been conﬁgured by checking that the Data ﬂag is set

to Y.