NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

20 Chapter1
Overview
Software Configuration Maximums (MPE/iX 6.0)
Software Configuration Maximums
(MPE/iX 6.0)
The following are the software maximums in Table 1-1 that must be
adhered to when configuring a supported link. These maximums may
be further limited by the system hardware (number of available slots).
Maximums are also documented throughout the manual for the
appropriate screen.
Table 1-1 Configuration Maximums
Screen Number/Description Path Maximum Limit
#9 Network Directory Select
Node Name
None
File Size Limit
a
a. Maintenance Node command EXPANDDIR may be used to expand the directory
file. Refer to Using the Node Management Services (NMS) Utilities manual for
information regarding this command.
#85 Link Selection LINK 256/system
#112 Network Interface
Configuration
NETXPORT.NI
12 NI/system
b
b. One NI must be used for loopback.
#115 Point-to-Point Mapping
Configuration
NETXPORT.NI.NIname.MAPPING 1024
Mappings/Router
#117 Gateway Half NI Links NETXPORT.NI.NIname.LINK 1 link/Gateway
Half NI
#119 Point-to-Point NI Links NETXPORT.NI.NIname. 40 links/Router NI
#151 X.25 Network Interface
Links
NETXPORT.NI.NIname.LINK 12 links/X.25 NI
#152 Neighbor Gateways NETXPORT.NI.NIname.INTERNET 14 gateways/NI
#158 Neighbor Gateway
Reachable Networks
NETXPORT.NI.NIname.INTERNET.gatewayn
2550 nets/NI
c
c. 2,550 reachable networks (255 pages and 10 reachable nets per page).
#162 X.25 SVC Address Key
Paths
NETXPORT.NIname.PROTOCOL.X25.SVCPATH 2048/X.25 NI
#163 X.25 PVC Address Key
Paths
NETXPORT.NIname.PROTOCOL.X.25.PVCPATH 128/X.25NI
#164 X.25 User Facility Sets NETXPORT.NI.NIname.POROTOCOL.X25.FACSET 128/X.25 NI