NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)
206 Chapter10
100VG-AnyLAN Network Interface Configuration Screens
Network Interface Configuration
Network Interface Configuration
The Network Interface Configuration screen (#112) in Figure 10-2 is
displayed when you press the
[Go To NI] function key at the Network
Transport Configuration Selection screen (Figure 4-2). It is also
displayed when you type the path name:
@NETXPORT.NI
in the command window of any screen and press the [Enter] key.
Figure 10-2 Network Interface Configuration Screen
Use the fields and the function keys of the select screen to perform the
desired action:
• To define a new VG100LAN NI, specify the NI name and NI type
VG100LAN; then press the
[Add] function key. The path for the
selected NI name is added to the configuration file and the data
screen on that path is displayed. You can have a maximum of 12
NI’s per system (one NI must be used for loopback). However,
HP supports up to two active VG100LAN NI’s per system.
• To modify an existing NI configuration, specify the NI name; then
press the
[Modify] function key. The data screen on the path for the
specified NI name is displayed.