NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

212 Chapter10
100VG-AnyLAN Network Interface Configuration Screens
Internet Protocol Configuration
Internet Protocol Configuration
The IP Protocol Configuration screen (#156) in Figure 10-5 is displayed
when you press the
[Go To IP] function key at the Protocol Configuration
screen (Figure 10-4). It is also displayed when you type the path name:
@NETXPORT.NI. NIname .PROTOCOL.IP
in the command window of any screen and press the
[Enter] key, where
NIname is a configured VG100LAN NI.
Figure 10-5 IP Protocol Configuration Screen
This screen is used to supply IP protocol information for the network
being configured. Each NI has an IP address. The IP address field is a
key element in IP routing and datagram delivery algorithms. The IP
subnet mask field allows you to identify an IP subnet mask for the NI
named in the path. The store and forward buffers field is useful for
internal resource allocation and performance tuning.
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or modifying. Verify
that the data record has been created by checking that the Data flag is
set to Y.