NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

232 Chapter11

100Base-T Network Interface Conﬁguration Screens

100Base-T Network Interface Conﬁguration

The 100Base-T Network Interface Conﬁguration screen (#298) in

Figure 11-3 is displayed when you select an NI name and the NI type

BT100 at the Network Interface Conﬁguration screen (Figure 11-2) and

press the

[Add] or [Modify] function key. It is also displayed when you type

the path name:

@NETXPORT.NI.

NIname

in the command window of any screen and press the [Enter] key, where

NIname is a conﬁgured BT100 NI name.

Figure 11-3 BT100 Network Interface Conﬁguration Screen

The BT100 network interface (NI) module serves to interface the upper

layers of the transport product to the link layer. This screen supplies

the information required for that interface. All of the ﬁelds, with the

exception of the HP UPC number, are used for internal resource

allocation.

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or modifying. Verify

that the data record has been created by checking that the Data ﬂag is

set to Y. From this screen you proceed to the screens used to conﬁgure

the BT100 link and internetwork routing.

Choose the item you wish to conﬁgure, and press the corresponding key.