NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 11 235

100Base-T Network Interface Conﬁguration Screens

Protocol Conﬁguration

The Protocol Conﬁguration screen (#113) in Figure 11-4 is displayed

when you press the

[Go To PROTOCOL] function key at the BT100 Network

Interface Conﬁguration screen (Figure 11-3). It is also displayed when

you type the path name:

@NETXPORT.NI.

NIname

.PROTOCOL

in the command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured BY100 NI.

Figure 11-4 Protocol Conﬁguration Screen

For the BT100 NI, you conﬁgure the IP, probe, and ARP protocols.

Choose the protocol to conﬁgure, and press the corresponding function

key.