NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

246 Chapter11

100Base-T Network Interface Conﬁguration Screens

Neighbor Gateways

The Neighbor Gateways screen (#152) in Figure 11-9 is displayed when

you press the

[Go To INTERNET] function key at the BT100 Network

Interface Conﬁguration screen (Figure 11-3). It is also displayed when

you type the path name:

@NETXPORT.NI.

NIname

.INTERNET

in the command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured BT100 NI.

Figure 11-9 Neighbor Gateways Screen

Use this screen, and the screens that follow it, to identify the gateways

on this network. Use the ﬁelds and the function keys of this select

screen to perform the desired action as follows:

• To identify a new gateway, specify the gateway name; then press the

[Add] function key. The path for the selected gateway name is added

to the conﬁguration ﬁle, and the data screen on the path is

displayed. You may conﬁgure up to 14 gateways under an NI.

• To modify an existing gateway conﬁguration, specify the gateway

name; then press the

[Modify] function key. The data screen on the

path for the speciﬁed gateway is displayed.