NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

254 Chapter12
Gateway Half Network Interface Configuration Screens
Network Interface Configuration
Network Interface Configuration
The Network Interface Configuration screen (#112) in Figure 12-2 is
displayed when you press the
[Go To NI] function key at the Network
Transport Configuration screen (Figure 4-2). It is also displayed when
you type the path name:
@NETXPORT.NI
in the Command window of any screen and press the [Enter] key.
Figure 12-2 Network Interface Configuration Screen
Use the fields and function keys of the select screen to perform the
desired action.
• To define a new gateway, specify the NI name and the NI type
GATEWAY; then press the
[Add] function key. The path for the new NI
name is added to the configuration file, and the next screen for
configuring a gateway NI is displayed. Up to 12 NI’s are
supported per system (one NI must be used for loopback).
• To modify an existing gateway NI, specify the NI name and press the
[Modify] function key. The next screen is displayed with the data for
that gateway NI.