NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

256 Chapter12
Gateway Half Network Interface Configuration Screens
Gateway Half Network Interface Configuration
Gateway Half Network Interface
Configuration
The gateway half network interface (NI) interfaces the upper layers of
the transport protocol to the data link layer. The Gateway Half
Network Interface Configuration screen (#98) shown in Figure 12-3
supplies the information required for that interface. The screen is
displayed when you select an NI name of type GATEHALF at the
Network Interface Configuration screen (Figure 12-2) and press the
[Add] or [Modify] function key. It is also displayed when you type the path
name:
@NETXPORT.NI. NIname
in the command window of any screen and press the [Enter] key, where
the NIname is a configured gateway half NI.
Figure 12-3 Gateway Half Network Interface Configuration Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or updating. You verify
that the data record has been created by checking that the Data flag is
set to Y.
From this screen you proceed to the screens used to configure the
gateway-half network interface.