NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 12 267

Gateway Half Network Interface Conﬁguration Screens

Gateway Half Network Interface Link

The Gateway Half Network Interface Link screen (#117) in Figure 12-8

is displayed when you press the

[Go To LINK] function key at the Gateway

Half Network Interface Conﬁguration screen (Figure 12-3). It is also

displayed when you type the path name:

@NETXPORT.NI.

NIname

.LINK

in the command window of any screen and press the

[Enter] key, where

NIname is the conﬁgured gateway half link network interface name.

Figure 12-8 Gateway Half Network Interface Link Screen

Use the ﬁelds of this select screen in combination with the function

keys to perform the desired action.

• To deﬁne a new NI link conﬁguration, specify the link name and link

type, then press the

[Add] function key. The path for the selected link

name is added to the conﬁguration ﬁle, and the data screen on the

path is displayed. You may conﬁgure only one network link per

gateway half NI.

• To modify an existing NI link conﬁguration, specify the link name,

then press the

[Modify] function key. The next screen for the speciﬁed

link is displayed.