NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 12 273
Gateway Half Network Interface Configuration Screens
Gateway Half Dial Link Configuration
Related screens:
• NETXPORT.NI.
NIname .LINK
Dial ID protocol is enabled/disabled here
• NETXPORT.NI.
NIname .PROTOCOL.DIAL
Security validation is enabled/disabled here.
Default value: HP
Start device on
gateway half
initialization
(Y/N) A Y (Yes) value means that the device is to be started
when a NETCONTROL START command is issued for this
network interface. N (No) means that a NETCONTROL
ADDLINK command must be used to start the device.
Default value: Y
Range: Y or N
Enable idle
device timer
(Y/N) This field specifies whether the device is to be
disconnected automatically if no packets have been
received or transmitted over the link during a specified
time period. It is relevant only if a nonzero timeout
value has been entered in the Gateway Half NI screen
(see related screens).
Related screen:
• NETXPORT.NI.
NIname
Configures router network interface information.
The value configured for the idle device timeout is
configured on this screen.
Default value: Y
Range: Y or N