NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

274 Chapter12

Gateway Half Network Interface Conﬁguration Screens

Neighbor Gateways

The Neighbor Gateways screen (#152) in Figure 12-11 is displayed

when you press the

[Go To INTERNET] function key at the Gateway Half

Network Interface Conﬁguration screen (Figure 12-3). It is also

displayed when you type the path name:

@NETXPORT.NI.

NIname

.INTERNET

in the command window of any screen and press the

[Enter] key, where

the NIname is the conﬁgured gateway-half NI name.

Figure 12-11 Neighbor Gateways Screen

Use the ﬁelds and the function keys of this select screen to perform the

desired action:

• To deﬁne a new gateway conﬁguration, specify the gateway name;

then press the

[Add] function key. The path for the selected gateway

name is added to the conﬁguration ﬁle, and the data screen on the

path is displayed. You may conﬁgure up to 14 gateways under

an NI.

• To modify an existing gateway conﬁguration, specify the gateway

name; then press the

[Modify] function key. The data screen on the

path for the speciﬁed gateway is displayed.