NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

282 Chapter13
Loopback Network Interface Configuration Screens
Network Interface Configuration
Network Interface Configuration
The Network Interface Configuration screen (#112) in Figure 13-2 is
displayed when you press the
[Go To NI] function key at the Network
Transport Configuration screen (Figure 4-2). It is also displayed when
you type the path name:
@NETXPORT.NI
in the Command window and press the [Enter] key.
Figure 13-2 Network Interface Configuration
To configure a loopback interface, enter a network interface name of
type LOOP and press the
[Add] function key. (Note that loopback is
configured automatically when you use guided configuration.) You may
configure up to 12 NI’s per system (one NI must be used for
loopback.)