NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 13 283
Loopback Network Interface Configuration Screens
Network Interface Configuration
Fields Network
interface
name (Required.) This is the name of the network interface
you want to configure or modify. The name can contain
as many as eight alphanumeric characters. The first
character must be alphabetic.
Type (GATEHALF,
LAN, LOOP,
ROUTER, X.25,
SNA, TOKEN,
FDDI, VG100LAN,
or BT100) This field is required if you are adding a network
interface. If you are configuring a loopback NI, select
LOOP.
New name (Required only when you are renaming an
existing network interface.) Type the current name
in the network interface name field. Type the new
name in the new name field. Press the
[Rename] function
key.
The name can contain as many as eight alphanumeric
characters. The first character must be alphabetic.