NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

290 Chapter14
Logging Configuration Screens
NETXPORT Log Configuration
NETXPORT Log Configuration
The Netxport Log Configuration (1) screen (#61) in Figure 14-2 is
displayed when you press the function key for
[Go To Logging] at the
Unguided Configuration screen (#80) shown in Figure 2-6.
Figure 14-2 Netxport Log Configuration (1) Screen
Use the fields and the function keys of the screen to configure logging
for the subsystems represented on the screen. If the subsystem for
which you want to enable logging does not appear on the first screen,
press the
[Next Screen] function key to go to the next Netxport Log
Configuration screen. There are a total of six logging configuration
screens.
Enable or disable logging classes (or accept HP-recommended defaults).
Press the
[Save Data] key on each screen to create or modify the data
record. Verify that the data record has been created by checking that
the Data flag is Y.
For more information on logging classes and subsystems see the
NS 3000/iX Operations and Maintenance Reference Manual.