NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 14 295
Logging Configuration Screens
NETXPORT Log Configuration
Fields Console
logging The value entered in this field specifies whether or not
logging events for the subsystem and class listed beside
the field will be logged to the system console. A value
must be entered for each subsystem and class listed. A
Y (yes) enables logging to the console, N (no) disables
logging to the console.
Disk
logging The value entered in this field specifies whether or not
logging events for the subsystem and class listed beside
the field will be logged to a disk file. A value must be
entered for each subsystem and class listed. A Y (yes)
enables logging to a file, N (no) disables logging to a file.
The file name that NMS uses is NMLG
nnnn .PUB.SYS,
where nnnn is a number from 0000 to 9999. All logging
classes in all subsystems are logged to this file. At each
system startup, or when a file is full, NMS creates a
new NMLG
nnnn .PUB.SYS file, naming each
successive logging file by incrementing nnnn. When
NMLG9999.PUB.SYS is full, NMS names the next
logging file NMLG0000.PUB.SYS.
The Netxport Log Configuration (5) screen (#69) in Figure 14-6 is
displayed when you press the
[Next Screen] function key from the Netxport
Log Configuration (4) screen.
Figure 14-6 Netxport Log Configuration (5) Screen