NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

310 Chapter15

Network Directory

Network Directory Select Node Name

The Network Directory Select Node Name screen (#9) shown in Figure

15-4 is displayed when you press the function key for

[Update Dir] at the

Network Directory Main screen (Figure 15-3). The function of this

screen is to display node names that are currently conﬁgured in the

directory, and to allow you to delete, rename, add, or modify

information about a node.

Figure 15-4 Network Directory Select Node Name Screen

Press the

[Next Page] and [Prev Page] function keys to see additional nodes

that have already been conﬁgured.

• To add a node to the directory, specify the node name and the

global/local setting; then press the

[Add] function key. You are taken

to the Network Directory Data screen. You may add new entries as

long as room remains in the ﬁle. If the ﬁle ﬁlls, you may use the

Maintenance Mode command EXPANDDIR to expand the ﬁle.

• To modify path report data for a node in the directory, specify the

node name; then press the

[Modify] function key. This includes deleting

part, but not all, of a node’s path report list.

• To delete a node from the directory, specify the name of a node; then

press the

[Delete] function key. Press the [Delete] function key again to

conﬁrm the deletion.