NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 3 39
Link Configuration Screens
Link Configuration: LAP-B Link Data
Link Configuration: LAP-B Link Data
The Link Configuration: LAP-B Link Data screen (#81) in Figure 3-4 is
displayed when you select a link name of type LAP-B at the Link
Selection screen (Figure 3-2) and press the
[Add] or [Modify] function key.
It is also displayed when you type the path name:
@LINK. linkname
in the command window of any screen and press the [Enter] key, where
linkname is a configured LAP-B link.
Figure 3-4 Link Configuration: LAP-B Link Data Screen
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or modifying. Verify
that the data record has been created by checking that the Data flag is
set to Y.
Fields Physical path
The physical pathof the ProgrammableSerial Interface
(PSI) card.
The basic formula for deriving the physical path is 4 x
slot number. (Example: 4 x 10 = 40.) For systems with
dual card cages, you must also specify a path number
for the card cage, as follows:
PathNumber/(4 X SlotNumber)